How to Build Kitchen Cabinet Carcass
How to Build Kitchen Cabinet . hi guys you Jacob i’m going to show you today on how to build a carcass for kitchen cabinets pretty simple it’s really really simple task to do in your shop you can do it anybody can do it today we’re going to build the carcass and for material we’re going to be using a prefinished plywood which is really nice for carcasses that way it’s already finished so when you’re done basically the shelves face frame and you gotta have it so what we have here is the two side panels and what we did to get to the side we took a full sheet of plywood and we gripped it lengthways and we worked a 22 inch and a quarter inches and then from there then we cut our height of our cabinet step one which is 34 and a half so we cut those out and these are going to be your two sides to our cabin now that we have our panels made we’re going to go ahead and put the toe kick on I already pre-cut a padlock because we’re going to be made making lots of cabinets.
So this cabin block is two and a half inches wide by four and a half inches tall ok so we’re going to pick the corner of the cabinets it’s going to be the toe kick and we’re going to draw a pattern and then when our pattern is done go ahead and – no the coke is already cut out i’m going to show you a simple way to mark your pocket holes before we start drilling and notice is the outside of the cabin you want to hide the particle so what we’re going to do is sparkles three inches or so and these particles will have to face we’re going to do the same on this side now that I’ve got the pocket holes drilled for the side panels it’s will show you one of them and these are mirror images this is an outside this is an outside inside of the cabin ok now that now we can go ahead several cabinet so now that we’re assembling her cabinet we’re going to put two bodies offers and going to use this handy correct the right angle clamp so that you can go ahead and attach your internet for scripts ok yeah yeah ok so now we’re going to attach the total yeah yeah we’re out of that.
How to Build Kitchen Cabinet Carcass
So our next step is to attach the bottom yeah yeah yeah so now we’re starting to a cabin got to bottom pieces on the bottom of the cabinet one side panel now we’re going to attach it yeah ok so now our cabinet is really taking shape here it’s looking really good but we cut these down the link cryptic park abilities and we’re going to use these to put it in the comments for this is going to be the front this is will also attach your face friend so this piece go up here and also we’re going to put one in the back to attach the bag like this which will be helped us to attach it to the wall yeah yeah ok so now we are assembling our darkest the cabinet itself now we’re going to go and what does we need to head back and also drill our muffin holes are inside the cabin much easier to do right now so show you how to do this and next up so now our parks is done we’re going to go ahead and install some shelf in holes in the cart so and I built this block here which is eight inches you don’t want to show up normal lower than 8 inches or so so we’re going to go ahead and start drilling our holes ok ok so now we have our pumpkins all drilled in this artist of the cabinet we’re gonna install a quarter pound the back all that does is finish out this quiet for the inside makes it a little nice cabin it’s optional you don’t have to do that but we’re going to do ok so I yeah but we’re going to go ahead and attached to the back of the carpet now demonstration purposes we’re not going to glue today but I would do this for i staple it down